|
Vanbellingen, Q. P., Fu, T., Bich, C., Amusant, N., Stien, D., Della-Negra, S., et al. (2016). Mapping Dicorynia guianensis Amsh. wood constituents by submicron resolution cluster-TOF-SIMS imaging. Journal of Mass Spectrometry, 51(6), 412–423.
Abstract: The preparation of tropical wood surface sections for time-of-flight secondary ion mass spectrometry imaging is described, and the use of delayed extraction of secondary ions and its interest for the analysis of vegetal surface are shown. The method has been applied to the study by time-of-flight secondary ion mass spectrometry imaging with a resolution of less than one micron of a tropical wood species, Dicorynia guianensis, which is one of the most exploited wood in French Guiana for its durable heartwood. The heartwood of this species exhibits an economical importance, but its production is not controlled in forestry. Results show an increase of tryptamine from the transition zone and a concomitant decrease of inorganic ions and starch fragment ions. These experiments lead to a better understanding of the heartwood formation and the origin of the natural durability of D. guianensis. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.
Keywords: Dicorynia guianensis; heartwood formation; mass spectrometry imaging; Tof-Sims; tropical wood; tryptamine
|
|
|
Clair, B., Jaouen, G., Beauchene, J., & Fournier, M. (2003). Mapping radial, tangential and longitudinal shrinkages and relation to tension wood in discs of the tropical tree Symphonia globulifera. Holzforschung, 57(6), 665–671.
Abstract: A method for measuring shrinkage resulting from drying in the three anisotropic directions is developed and tested. Measurements are performed on sawn discs, a technique which simplifies preparation and enables large numbers of measurements. Shrinkage values can be represented as a map of the disc surface. The results indicate that comparisons between shrinkage distribution and tension wood distribution on the discs show a clear relationship and can be measured with relatively high accuracy in reference to the shrinkage map. In the long term, this method could be useful in the timber industry as a means for choosing the direction in which logs are cut depending on their type of wood composition.
Keywords: drying shrinkage; tension wood; Symphonia globulifera L. f.
|
|
|
Taureau, F., Robin, M., Proisy, C., Fromard, F., Imbert, D., & Debaine, F. (2019). Mapping the mangrove forest canopy using spectral unmixing of very high spatial resolution satellite images. Remote Sens., 11(3), 367.
Abstract: Despite the lowtree diversity and scarcity of the understory vegetation, the high morphological plasticity of mangrove trees induces, at the stand level, a very large variability of forest structures that need to be mapped for assessing the functioning of such complex ecosystems. Fully constrained linear spectral unmixing (FCLSU) of very high spatial resolution (VHSR) multispectral images was tested to fine-scale map mangrove zonations in terms of horizontal variation of forest structure. The study was carried out on three Pleiades-1A satellite images covering French island territories located in the Atlantic, Indian, and Pacific Oceans, namely Guadeloupe, Mayotte, and New Caledonia archipelagos. In each image, FCLSU was trained from the delineation of areas exclusively related to four components including either pure vegetation, soil (ferns included), water, or shadows. It was then applied to the whole mangrove cover imaged for each island and yielded the respective contributions of those four components for each image pixel. On the forest stand scale, the results interestingly indicated a close correlation between FCLSU-derived vegetation fractions and canopy closure estimated from hemispherical photographs R 2 = 0.95) and a weak relation with the Normalized Difference Vegetation Index (R 2 = 0.29). Classification of these fractions also offered the opportunity to detect and map horizontal patterns of mangrove structure in a given site. K-means classifications of fraction indeed showed a global view of mangrove structure organization in the three sites, complementary to the outputs obtained from spectral data analysis. Our findings suggest that the pixel intensity decomposition applied to VHSR multispectral satellite images can be a simple but valuable approach for (i) mangrove canopy monitoring and (ii) mangrove forest structure analysis in the perspective of assessing mangrove dynamics and productivity. As with Lidar-based surveys, these potential new mapping capabilities deserve further physically based interpretation of sunlight scattering mechanisms within forest canopy. © 2019 by the authors.
Keywords: Forest structure; Guadeloupe; Hemispherical photographs; Mangrove; Mayotte; New Caledonia; Remote sensing; Image resolution; Photography; Photomapping; Pixels; Remote sensing; Satellites; Vegetation; Forest structure; Guadeloupe; Hemispherical photographs; Mangrove; Mayotte; New Caledonia; Forestry
|
|
|
Scotti, I., Gugerli, F., Pastorelli, R., Sebastiani, F., & Vendramin, G. G. (2008). Maternally and paternally inherited molecular markers elucidate population patterns and inferred dispersal processes on a small scale within a subalpine stand of Norway spruce (Picea abies [L.] Karst.). For. Ecol. Manage., 255(11), 3806–3812.
Abstract: The within-population spatial structure of genetic diversity is shaped by demographic processes, including historical accidents such as forest perturbations. Information drawn from the analysis of the spatial distribution of genetic diversity is therefore inherently linked to demographic-historical processes that ultimately determine the fate of populations. All adult trees and saplings in a 1.4-ha plot within a mixed Norway spruce (Picea abies [L.] Karst) stand were characterised by means of chloroplast (paternally inherited) markers, and a large sub-sample of these were genotyped at mitochondrial (maternally inherited) molecular markers. These data were used to analyse the spatial distribution of genetic variation and to compare the patterns corresponding to the two marker types. The plot presented non-homogeneous local stem density in the younger cohorts, and the indirect effect of this source of variation on the spatial genetic structure was investigated. Results suggest that (i) spatially limited seed dispersal induced patchiness in genotype distribution, while pollen flow had a homogenising effect; (ii) deviations from random spatial structure were stronger in the demographically most stable portions of the stand, while they were weaker where sudden bursts of regeneration occurred; (iii) spatially overlapping adult and sapling cohorts displayed the same spatial genetic structure (stronger on stable areas, weaker in portions of the stand undergoing events of intense regeneration), which was substantiated by the influence of local demographic processes. Regeneration dynamics as modulated by demography thus influences the distribution of genetic diversity within the stand both in the younger life stages and in the adult population. (C) 2008 Elsevier B.V. All rights reserved.
Keywords: chloroplast microsatellites; mitochondrial minisatellites; pollen/seed dispersal; demography; spatial autocorrelation
|
|
|
Marcon, E., & Puech, F. (2010). Measures of the geographic concentration of industries: improving distance-based methods. J. Econ. Geogr., 10(5), 745–762.
Abstract: We discuss a property of distance-based measures that has not been addressed with regard to evaluating the geographic concentration of economic activities. The article focuses on the choice between a probability density function of point-pair distances or a cumulative function. We begin by introducing a new cumulative function, M, for evaluating the relative geographic concentration and the co-location of industries in a non-homogeneous spatial framework. Secondly, some rigorous comparisons are made with the leading probability density function of Duranton and Overman (2005), Kd. The merits of the simultaneous use of Kd and M is proved, underlining the complementary nature of the results they provide.
Keywords: Geographic concentration; distance-based methods; K-density function; Ripley's K function; M function; C40; C60; R12; L60
|
|
|
Buckland, S. T., Yuan, Y., & Marcon, E. (2017). Measuring temporal trends in biodiversity. AStA Advances in Statistical Analysis, 101(4), 461–474.
Abstract: In 2002, nearly 200 nations signed up to the 2010 target of the Convention for Biological Diversity, ‘to significantly reduce the rate of biodiversity loss by 2010’. To assess whether the target was met, it became necessary to quantify temporal trends in measures of diversity. This resulted in a marked shift in focus for biodiversity measurement. We explore the developments in measuring biodiversity that was prompted by the 2010 target. We consider measures based on species proportions, and also explain why a geometric mean of relative abundance estimates was preferred to such measures for assessing progress towards the target. We look at the use of diversity profiles, and consider how species similarity can be incorporated into diversity measures. We also discuss measures of turnover that can be used to quantify shifts in community composition arising, for example, from climate change. © 2017, The Author(s).
Keywords: Biodiversity measures; Diversity profiles; Geometric mean; Species similarity; Turnover measures
|
|
|
Almeras, T., & Gril, J. (2007). Mechanical analysis of the strains generated by water tension in plant stems. Part 1: stress transmission from the water to the cell walls. Tree Physiol., 27(11), 1505–1516.
Abstract: Plant tissues shrink and swell in response to changes in water pressure. These strains can be easily measured, e.g., at the surface of tree stems, to obtain indirect information about plant water status and other physiological parameters. We developed a mechanical model to clarify how water pressure is transmitted to cell walls and causes shrinkage of plant tissues, particularly in the case of thick-walled cells such as wood fibers. Our analysis shows that the stress inside the fiber cell walls is lower than the water tension. The difference is accounted for by a stress transmission factor that depends on two main effects. The first effect is the dilution of the stress through the cell wall, because water acts at the lumen border and is transmitted to the cuter border of the cell, which has a larger circumference. The second effect is the partial conversion of radial stress into tangential stress. Both effects are quantified as functions of parameters of the cell wall structure and its mechanical properties.
Keywords: biomechanics; cell mechanics; diurnal strains; mechanical model; multilayer cylinder; stress transtnissionjactor
|
|
|
Almeras, T. (2008). Mechanical analysis of the strains generated by water tension in plant stems. Part II: strains in wood and bark and apparent compliance. Tree Physiol., 28(10), 1513–1523.
Abstract: Tree steins shrink in diameter during the day and swell during the night in response to changes in water tension in the xylem. Stein shrinkage can easily be measured in a nondestructive way, to derive continuous information about tree water status. The relationship between the strain and the change in water tension can be evaluated by empirical calibrations, or can be related to the structure of the plant. A mechanical analysis was performed to make this relationship explicit. The stem is modeled as a cylinder made of multiple layers of tissues, including heartwood, sapwood, and inner and outer bark. The effect of changes in water tension on the apparent strain at the surface of a tissue is quantified as a function of parameters defining stem anatomy and the mechanical properties of the tissues. Various possible applications in the context of tree physiology are suggested.
Keywords: biomechanics; calibration; diurnal strains; mechanical model; multilayer cylinder; water potential
|
|
|
Clair, B., Almeras, T., Yamamoto, H., Okuyama, T., & Sugiyama, J. (2006). Mechanical behavior of cellulose microfibrils in tension wood, in relation with maturation stress generation. Biophys. J., 91(3), 1128–1135.
Abstract: A change in cellulose lattice spacing can be detected during the release of wood maturation stress by synchrotron x-ray diffraction experiment. The lattice strain was found to be the same order of magnitude as the macroscopic strain. The fiber repeat distance, 1.033 nm evaluated for tension wood after the release of maturation stress was equal to the conventional wood values, whereas the value before stress release was larger, corresponding to a fiber repeat of 1.035 nm, nearly equal to that of cotton and ramie. Interestingly, the fiber repeat varied from 1.033 nm for wood to 1.040 nm for algal cellulose, with an increasing order of lateral size of cellulose microfibrils so far reported. These lines of experiments demonstrate that, before the stress release, the cellulose was in a state of tension, which is, to our knowledge, the first experimental evidence supporting the assumption that tension is induced in cellulose microfibrils.
|
|
|
Clair, B., Ghislain, B., Prunier, J., Lehnebach, R., Beauchene, J., & Alméras, T. (2019). Mechanical contribution of secondary phloem to postural control in trees: the bark side of the force. New Phytol, 221(1), 209–217.
Abstract: Summary To grow straight, plants need a motor system that controls posture by generating forces to offset gravity. This motor function in trees was long thought to be only controlled by internal forces induced in wood. Here we provide evidence that bark is involved in the generation of mechanical stresses in several tree species. Saplings of nine tropical species were grown tilted and staked in a shadehouse and the change in curvature of the stem was measured after releasing from the pole and after removing the bark. This first experiment evidenced the contribution of bark in the up-righting movement of tree stems. Combined mechanical measurements of released strains on adult trees and microstructural observations in both transverse and longitudinal/tangential plane enabled us to identify the mechanism responsible for the development of asymmetric mechanical stress in the bark of stems of these species. This mechanism does not result from cell wall maturation like in wood, or from the direct action of turgor pressure like in unlignified organs, but is the consequence of the interaction between wood radial pressure and a smartly organized trellis structure in the inner bark.
Keywords: bark; Malvaceae; maturation stress; secondary phloem; tree biomechanics
|
|