Home | [11–20] << 21 22 23 24 25 26 27 28 29 30 >> [31–40] |
McLean, J. P., Arnould, O., Beauchene, J., & Clair, B. (2012). The effect of the G-layer on the viscoelastic properties of tropical hardwoods. Ann. Forest Sci., 69(3), 399–408.
Abstract: · Context and aim This study aimed to examine the effect of the tension wood G-layer on the viscoelastic properties of wood. · Methods Tension wood and opposite wood samples were obtained from six French Guianese tropical rainforest species (Sextonia rubra, Ocotea guyanensis, Inga alba, Tachigali melinoni, Iyranthera sagotiana and Virola michelii); the tension wood of the former three of these species had a Glayer, whilst the tension wood from the latter three had no Glayer. Tensile dynamic mechanical analysis (DMA) was performed on green never dried wood samples in the longitudinal direction with samples submerged in a water bath at a temperature (30°C) and frequency (1 Hz) representative of the conditions experienced by wood within a living tree. Then, DMA was repeated with samples conditioned to an air-dried state. Finally, samples were oven-dried to measure longitudinal shrinkage. · Results Tension wood did not always have a higher longitudinal storage (elastic) modulus than opposite wood from the same tree regardless of the presence or absence of a G-layer. For the species containing a G-layer, tension wood had a higher damping coefficient and experienced a greater longitudinal shrinkage upon drying than opposite wood from the same species. No difference was found in damping coefficients between tension wood and opposite wood for the species that had no G-layer. · Conclusion It is proposed that the different molecular composition of the G-layer matrix has an influence on the viscoelasticity of wood, even if a biomechanical gain is not yet clear. This study shows that rheological properties and longitudinal shrinkage can be used to detect the presence of a G-layer in tension wood. © INRA/Springer-Verlag France 2011.
Keywords: Dma; G-layer; Reaction wood; Tropical wood; Viscoelasticity
|
Talaga, S., Murienne, J., Dejean, A., & Leroy, C. (2015). Online database for mosquito (Diptera, Culicidae) occurrence records in French guiana. ZooKeys, 2015(532), 107–115.
Abstract: A database providing information on mosquito specimens (Arthropoda: Diptera: Culicidae) collected in French Guiana is presented. Field collections were initiated in 2013 under the auspices of the CEnter for the study of Biodiversity in Amazonia (CEBA: http://www.labexceba.fr/en/). This study is part of an ongoing process aiming to understand the distribution of mosquitoes, including vector species, across French Guiana. Occurrences are recorded after each collecting trip in a database managed by the laboratory Evolution et Diversité Biologique (EDB), Toulouse, France. The dataset is updated monthly and is available online. Voucher specimens and their associated DNA are stored at the laboratory Ecologie des Forêts de Guyane (Ecofog), Kourou, French Guiana. The latest version of the dataset is accessible through EDB’s Integrated Publication Toolkit at http://130.120.204.55:8080/ipt/resource.do?r=mosquitoesof french_guiana or through the Global Biodiversity Information Facility data portal at http://www.gbif.org/ dataset/5a8aa2ad-261c-4f61-a98e-26dd752fe1c5 It can also be viewed through the Guyanensis platform at http://guyanensis.ups-tlse.fr © Stanislas Talaga et al.
Keywords: Diversity; French guiana; Mosquitoes; Neotropics; Occurrence
|
Guitet, S., Sabatier, D., Brunaux, O., Herault, B., Aubry-Kientz, M., Molino, J. - F., et al. (2014). Estimating tropical tree diversity indices from forestry surveys: A method to integrate taxonomic uncertainty. For. Ecol. Manage., 328, 270–281.
Abstract: Analyses of tree diversity and community composition in tropical rain forests are usually based either on general herbarium data or on a restricted number of botanical plots. Despite their high taxonomic accuracy, both types of data are difficult to extrapolate to landscape scales. Meanwhile, forestry surveys provide quantitative occurrence data on large areas, and are thus increasingly used for landscape-scale analyses of tree diversity. However, the reliability of these approaches has been challenged because of the ambiguity of the common (vernacular) names used by foresters and the complexity of tree taxonomy in those hyper-diverse communities.We developed and tested a novel approach to evaluate taxonomic reliability of forestry surveys and to propagate the resulting uncertainty in the estimates of several diversity indicators (alpha and beta entropy, Fisher-alpha and Sørensen similarity). Our approach is based on Monte-Carlo processes that simulate communities by taking into account the expected accuracy and reliability of common names. We tested this method in French Guiana, on 9 one-hectare plots (4279 trees – DBH. ≥. 10. cm) for which both common names and standardized taxonomic determinations were available. We then applied our method of community simulation on large forestry inventories (560. ha) at the landscape scale and compared the diversity indices obtained for 10 sites with those computed from precise botanical determination situated at the same localities.We found that taxonomic reliability of forestry inventories varied from 22% (species level) to 83% (family level) in this Amazonian region. Indices computed directly with raw forestry data resulted in incorrect values, except for Gini-Simpson beta-diversity. On the contrary, our correction method provides more accurate diversity estimates, highly correlated with botanical measurements, for almost all diversity indices at both regional and local scales. We obtained a robust ranking of sites consistent with those shown by botanical inventories.These results show that (i) forestry inventories represent a significant part of taxonomic information, (ii) the relative diversity of regional sites can be successfully ranked using forestry inventory data using our method and (iii) forestry inventories can valuably contribute to the detection of large-scale diversity patterns when biases are well-controlled and corrected.The tools we developed as R-functions are available in supplementary material and can be adapted with local parameters to be used for forest management and conservation issues in other regional contexts. © 2014 Elsevier B.V.
Keywords: Diversity; French guiana; Landscape scale; Monte-Carlo process; Rainforest; Tree community; Reliability; Surveys; Timber; Uncertainty analysis; Diversity; French Guiana; Landscape scale; Rainforest; Tree community; Forestry; estimation method; forest inventory; herbarium; landscape; numerical model; species diversity; taxonomy; uncertainty analysis; Forestry; Forests; Reliability; Surveys; French Guiana
|
Ghislain, B., & Clair, B. (2017). Diversity in the organisation and lignification of tension wood fibre walls – A review. IAWA Journal, 38(2), 245–265.
Abstract: Tension wood, a tissue developed by angiosperm trees to actively recover their verticality, has long been defined by the presence of an unlignified cellulosic inner layer in the cell wall of fibres, called the G-layer. Although it was known that some species have no G-layer, the definition was appropriate since it enabled easy detection of tension wood zones using various staining techniques for either cellulose or lignin. For several years now, irrespective of its anatomical structure, tension wood has been defined by its high mechanical internal tensile stress. This definition enables screening of the diversity of cell walls in tension wood fibres. Recent results obtained in tropical species with tension wood with a delay in the lignification of the G-layer opened our eyes to the effective presence of large amounts of lignin in the G-layer of some species. This led us to review older literature mentioning the presence of lignin deposits in the G-layer and give them credit. Advances in the knowledge of tension wood fibres allow us to reconsider some previous classifications of the diversity in the organisation of the fibre walls of the tension wood. © 2017 International Association of Wood Anatomists.
Keywords: diversity; fibres; G-layer; lignification; multilayered tension wood fibre walls; S1 + S2 + S3 + G; Tension wood
|
Paine, C. E. T., Harms, K. E., & Ramos, J. (2009). Supplemental irrigation increases seedling performance and diversity in a tropical forest. J. Trop. Ecol., 25, 171–180.
Abstract: Diversity is positively correlated with water availability at global, continental and regional scales. With the objective of better understanding the mechanisms that drive these relationships. we investigated the degree to which variation in water availability affects the performance (recruitment, growth a rid survival) of juvenile trees. Precipitation was supplemented throughout two dry seasons in a seasonal moist forest in south-eastern Peru. Supplementing precipitation by 160 mm mo(-1), we increased soil moisture by 17%. To generate seedling communities or known species composition, we sowed 3840 seeds of 12 species. We monitored the fates of the 554 seedlings recruited from the sown seeds. as well as 1856 older non-sown seedlings (10 cm <= height < 50 cm), and 2353 saplings (> 1 m tall). Watering significantly enhanced young seedling growth and survival, increasing stern density and diversity. Watering diminished the recruitment of species associated with upland forests, but increased the survival of both upland- and lowland-associated species. Though supplemental watering increased the growth of older seedlings. their density and diversity were unaffected. Sapling performance was insensitive to watering. We infer that variation in dry-season water availability may affect seedling community structure by differentially affecting recruitment and increasing overall survival. These results suggest that differential seedling recruitment and survival may contribute to the observed relationships between water availability, habitat associations and patterns of tree species richness.
Keywords: diversity; Estacion Biologica Los Amigos; habitat filtering; palms; Peru; precipitation; seasonality; seedling recruitment
|
Marcon, E. (2019). Entropy as a common measure of biodiversity and the spatial structure of economic activity. Rev. Econ., 70(3), 305–326.
Abstract: Measures of spatial concentration and specialization in economics are similar to those of biodiversity and ubiquity of species in ecology. Entropy is the fundamental tool that originated in statistical physics and information theory. The definition of number equivalents or effective numbers, that is the number of types in an ideal, simplified distribution, is introduced along with the partitioning of the joint diversity of a bi-dimensional distribution into absolute and relative concentration or specialization and replication. The whole framework is theoretically robust and allows measuring the spatial structure of a discrete space.
Keywords: Diversity; Economic geography; Spatial concentration; Specialization
|
Groc, S., Delabie, J. H. C., Fernández, F., Leponce, M., Orivel, J., Silvestre, R., et al. (2014). Leaf-litter ant communities (Hymenoptera: Formicidae) in a pristine Guianese rain-forest: Stable functional structure versus high species turnover. Myrmecological News, 19, 43–51.
Abstract: We compared the ant assemblages from four very heterogeneous habitats over a short-distance elevational gradient of vegetation (due to the presence of an inselberg) at the Nouragues Research Station, French Guiana. We focused on litter-dwelling ants, combining the use of pitfall traps and the Winkler method according to the Ants of the Leaf Litter Proto-col. This permitted us to note (1) a high leaf-litter ant diversity overall and a decreasing diversity gradient from the lowland rainforest to the top of the inselberg, and (2) differences in species density, composition and functional struc-ture. While the ant assemblages on the plateau and inselberg can be considered functionally similar and typical of an Amazonian rainforest, that of the transition forest, relatively homogenous, rather corresponded to an ant fauna typical of open areas. By contrast, the liana forest assemblage was unexpectedly richer and denser than the others, sheltering a litter-dwelling ant fauna dominated by numerous and abundant cryptic species. These taxonomical and functional dissi-milarities may reflect the influence of the environmental heterogeneity, which, through variable abiotic conditions, can contribute to maintaining a notably rich ant biodiversity in these Neotropical habitats.
Keywords: Diversity gradient; Functional groups; Habitat heterogeneity; Litter-dwelling ant communities; Local scale; Pristine Amazonian rainforest; Taxonomic and functional structure
|
Scotti, I., Montaigne, W., Cseke, K., & Traissac, S. (2013). RaBoT: A rarefaction-by-bootstrap method to compare genome-wide levels of genetic diversity. Ann. Forest Sci., 70(6), 631–635.
Abstract: Context: No efficient method is available to compare multi-locus estimates of diversity while taking into account inter-locus and inter-population stochastic variance. The advent of genome scan approaches makes the development of such tests absolutely necessary. Aims: We developed a method to compare genome-wide diversity estimates while taking into account – and factoring out – variation in census size and making use of inter-locus variance to assess significance of differences in diversity levels. Methods: An approach based on rarefaction with bootstrap re-sampling (RaBoT) was implemented into a test of multi-locus comparison of diversity coded in R. The properties of the test were studied by applying it to simulated populations with varying diversity levels and varying differences in diversity levels. The test was then applied to empirical data from disturbed and undisturbed populations of Virola michelii (Myristicaceae) genotyped at 693 amplified fragment length polymorphism (AFLP) markers. Results: RaBoT was found to be rather conservative, with large numbers of false negatives when the diversity in the compared populations was similar, and false positives mostly associated to comparisons of populations with extremely high levels of diversity. When applied to empirical data, RaBoT detected higher genetic diversity in a post-disturbance than in an undisturbed population and lower genetic diversity in a seedling than in the corresponding adult population, but it also revealed differences in diversity between subgroups within the disturbed and undisturbed plots. Conclusion: RaBoT is a sensitive method to compare multi-locus levels of diversity that can be applied both at the genotype level for dominant markers (e.g. AFLP) and at the allele level for biallelic codominant markers (e.g. single-nucleotide polymorphisms). © 2013 INRA and Springer-Verlag France.
Keywords: Diversity comparison; Genome scan; Genome-level diversity; Population genetics; Statistical testing
|
Almeras, T., Yoshida, M., & Okuyama, T. (2006). Strains inside xylem and inner bark of a stem submitted to a change in hydrostatic pressure. Trees-Struct. Funct., 20(4), 460–467.
Abstract: Tangential strains were measured with strain gauges at the surface of xylem and inner bark of saplings of Cryptomeria japonica D. Don. and Fagus silvatica L. during a pressurization test. The test consists in submitting the whole sapling to an artificially imposed hydrostatic pressure of increasing magnitude. The elastic response of the stems was found linear both at the surface of xylem and inner bark. A simple geometric model allows to compute radial strains in each tissue from tangential strain data. Inside inner bark, radial strains are much larger than tangential strains, because tangential strains are restrained by the core of wood. The material compliance of each tissue was computed as the ratio between the radial strain and the pressure that caused it. The material compliance of xylem is much lower than that of inner bark, but, as its thickness is much larger, its contribution to the apparent behavior of the stem is not negligible. Computation of material compliances by this pressurization test provides information about the specific behavior of each tissue in response to hydrostatic pressure. This can be used to estimate and interpret the calibration factor linking the water status of the plant to the apparent strain measured at its surface.
Keywords: diurnal strains; hydrostatic pressure; xylem; inner bark; mechanical properties
|
Piponiot, C., Derroire, G., Descroix, L., Mazzei, L., Rutishauser, E., Sist, P., et al. (2018). Assessing timber volume recovery after disturbance in tropical forests – A new modelling framework. Ecological Modelling, 384, 353–369.
Abstract: One third of contemporary tropical forests is designated by national forest services for timber production. Tropical forests are also increasingly affected by anthropogenic disturbances. However, there is still much uncertainty around the capacity of tropical forests to recover their timber volume after logging as well as other disturbances such as fires, large blow-downs and extreme droughts, and thus on the long-term sustainability of logging. We developed an original Bayesian hierarchical model of Volume Dynamics with Differential Equations (VDDE) to infer the dynamic of timber volumes as the result of two ecosystem processes: volume gains from tree growth and volume losses from tree mortality. Both processes are expressed as explicit functions of the forest maturity, i.e. the overall successional stage of the forest that primarily depends on the frequency and severity of the disturbances that the forest has undergone. As a case study, the VDDE model was calibrated with data from Paracou, a long-term disturbance experiment in a neotropical forest where over 56 ha of permanent forest plots were logged with different intensities and censused for 31 years. With this model, we could predict timber recovery at Paracou at the end of a cutting cycle depending on the logging intensity, the rotation cycle length, and the proportion of commercial volume. The VDDE modelling framework developed presents three main advantages: (i) it can be calibrated with large tree inventories which are widely available from national forest inventories or logging concession management plans and are easy to measure, both on the field and with remote sensing; (ii) it depends on only a few input parameters, which can be an advantage in tropical regions where data availability is scarce; (iii) the modelling framework is flexible enough to explicitly include the effect of other types of disturbances (both natural and anthropogenic: e.g. blow-downs, fires and climate change) on the forest maturity, and thus to predict future timber provision in the tropics in a context of global changes. © 2018 Elsevier B.V.
Keywords: Disturbance; Ecosystem modelling; Recovery; Sustainability; Tropical forest management
|