Abstract: Grain deviations and high extractives content are common features of many tropical woods. This study aimed at clarifying their respective impact on vibrational properties, referring to African Padauk (Pterocarpus soyauxii Taub.), a species selected for its interlocked grain, high extractives content and uses in xylophones. Specimens were cut parallel to the trunk axis (L), and local variations in grain angle (GA), microfibril angle (MFA), specific Young's modulus (E' (L) /rho, where rho stands for the density) and damping coefficient (tan delta(L)) were measured. GA dependence was analysed by a mechanical model which allowed to identify the specific Young's modulus (E'(3)/rho) and shear modulus (G'/rho) along the grain (3) as well as their corresponding damping coefficients (tan delta(3), tan delta(G)). This analysis was done for native and then for extracted wood. Interlocked grain resulted in 0-25A degrees GA and in variations of a factor 2 in E'(L)/rho and tan delta(L). Along the grain, Padauk wood was characterized, when compared to typical hardwoods, by a somewhat lower E'(3)/rho and elastic anisotropy (E'/G'), due to a wide microfibril angle plus a small weight effect of extracts, and a very low tan delta(3) and moderate damping anisotropy (tan delta(G)/tan delta(3)). Extraction affected mechanical parameters in the order: tan delta(3) a parts per thousand tan delta(G) > G'/rho > > E'(3)/rho. That is, extractives' effects were nearly isotropic on damping but clearly anisotropic on storage moduli.