Conte, D. E., Aboulaich, A., Robert, F., Olivier-Fourcade, J., Jumas, J. C., Jordy, C., et al. (2010). Sn-x[BPO4](1-x) composites as negative electrodes for lithium ion cells: Comparison with amorphous SnB0.6P0.4O2.9 and effect of composition. J. Solid State Chem., 183(1), 65–75.
Abstract: A comparative study of two Sn-based composite materials as negative electrode for Li-ion accumulators is presented. The former SnB0.6P0.4O2.9 obtained by in-situ dispersion of SnO in an oxide matrix is shown to be an amorphous tin composite oxide (ATCO). The latter Sn-0.72[BPO4](0.28) obtained by ex-situ dispersion of Sri in a borophosphate matrix consists of Sri particles embedded in a crystalline BPO4 matrix. The electrochemical responses of ATCO and Sn-0.72.[BPO4](0.28) composite in galvanostatic mode show reversible capacities of about 450 and 530 mAhg(-1), respectively, with different irreversible capacities (60% and 29%). Analysis of these composite materials by Sn-119 Mossbauer spectroscopy in transmission (TMS) and emission (CEMS) modes confirms that ATCO is an amorphous Sn-II composite oxide and shows that in the case of Sn-0.72[BPO4](0.28), the Surface of the tin clusters is mainly formed by Sn-II in an amorphous interface whereas the bulk of the clusters is mainly formed by Sn-0. The determination of the recoilless free fractions f (Lamb-Mossbauer factors) leads to the effective fraction of both Sn-0 and Sn-II species in such composites. The influence of chemical composition and especially of the surface-to-bulk tin species ratio oil the electrochemical behaviour has been analysed for several Sn-x[BPO4](1-x) composite materials (0.17 < x < 0.91). The cell using the compound Sn-0.72[BPO4](0.28) as active material exhibits interesting electrochemical performances (reversible capacity of 500 mAh g(-1) at C/5 rate). (C) 2009 Elsevier Inc. All rights reserved.
Keywords: Sn-based composites; Lithium-ion batteries; Negative electrodes; Mossbauer spectroscopy; LixSn alloys
|
Aimene, Y., Vidal-Salle, E., Hagege, B., Sidoroff, F., & Boisse, P. (2010). A Hyperelastic Approach for Composite Reinforcement Large Deformation Analysis. J. Compos Mater., 44(1), 5–26.
Abstract: A hyperelastic constitutive model is developed for textile composite reinforcement at large strain. A potential is proposed, which is the addition of two tension and one shear energies. The proposed potential is a function of the right Cauchy Green and structural tensor invariants whose choice corresponds to textile composite reinforcement mechanical behavior which exhibits weak elongations in the fiber directions and large angular variations in the fabric plane. The model is implemented in a Vumat user routine of ABAQUS/Explicit. Some elementary tests are performed in order to identify the model and verify its validity. It is then used to simulate the hemispherical punch forming of balanced and unbalanced fabrics. A correct agreement is obtained with experimental forming processes.
Keywords: hyperelasticity; woven reinforcements; forming; fabric mechanical behavior; finite element
|
Picard, N., Mortier, F., Rossi, V., & Gourlet-Fleury, S. (2010). Clustering species using a model of population dynamics and aggregation theory. Ecol. Model., 221(2), 152–160.
Abstract: The high species diversity of some ecosystems like tropical rainforests goes in pair with the scarcity of data for most species. This hinders the development of models that require enough data for fitting. The solution commonly adopted by modellers consists in grouping species to form more sizeable data sets. Classical methods for grouping species such as hierarchical cluster analysis do not take account of the variability of the species characteristics used for clustering. In this study a clustering method based on aggregation theory is presented. It takes account of the variability of species characteristics by searching for the grouping that minimizes the quadratic error (square bias plus variance) of some model's prediction. This method allows one to check whether the gain in variance brought by data pooling compensate for the bias that it introduces. This method was applied to a data set on 94 tree species in a tropical rainforest in French Guiana, using a Usher matrix model to predict species dynamics. An optimal trade-off between bias and variance was found when grouping species. Grouping species appeared to decrease the quadratic error, except when the number of groups was very small. This clustering method yielded species groups similar to those of the hierarchical cluster analysis using Ward's method when variance was small, that is when the number of groups was small. (C) 2009 Elsevier B.V. All rights reserved.
Keywords: Aggregation theory; Species grouping; Species richness; Tropical rainforest; Usher model
|
Ferrer, A., Dixon, A. F., Gibernau, M., & Hemptinne, J. L. (2010). Ovarian dynamics and specialisation in ladybirds. Ecol. Entomol., 35(1), 100–103.
Abstract: 2. This hypothesis was tested by comparing a generalist and a specialist ladybird species belonging to the same genus. 3. A resorption index was calculated for females of both species subjected to several starvation regimes. This index indicated that over a period of fasting of 3 days, the intensity of resorption was greater in the generalist than the specialist. When food was again supplied, oogenesis resumed and within 1 day was faster in the generalist than in the specialist. 4. As predicted, the resorption of oocytes and replenishment occurred faster in the generalist than in the specialist species. This is the first time, to our knowledge, that the speed and intensity of the ovarian dynamics of a predatory insect have been linked to its way of life.
Keywords: Ladybird beetles; oocyte resorption; ovarian dynamics; specialisation
|
Ferry, B., Morneau, F., Bontemps, J. D., Blanc, L., & Freycon, V. (2010). Higher treefall rates on slopes and waterlogged soils result in lower stand biomass and productivity in a tropical rain forest. J. Ecol., 98(1), 106–116.
Abstract: P>1. Relationships between tropical rain forest biomass and environmental factors have been determined at regional scales, e.g. the Amazon Basin, but the reasons for the high variability in forest biomass at local scales are poorly understood. Interactions between topography, soil properties, tree growth and mortality rates, and treefalls are a likely reason for this variability. 2. We used repeated measurements of permanent plots in lowland rain forest in French Guiana to evaluate these relationships. The plots sampled topographic gradients from hilltops to slopes to bottomlands, with accompanying variation in soil waterlogging along these gradients. Biomass was calculated for > 175 tree species in the plots, along with biomass productivity and recruitment rates. Mortality was determined as standing dead and treefalls. 3. Treefall rates were twice as high in bottomlands as on hilltops, and tree recruitment rates, radial growth rates and the abundance of light-demanding tree species were also higher. 4. In the bottomlands, the mean wood density was 10% lower than on hilltops, the basal area 29% lower and the height:diameter ratio of trees was lower, collectively resulting in a total woody biomass that was 43% lower in bottomlands than on hilltops. 5. Biomass productivity was 9% lower in bottomlands than on hilltops, even though soil Olsen P concentrations were higher in bottomlands. 6. Synthesis. Along a topographic gradient from hilltops to bottomlands there were higher rates of treefall, which decreased the stand basal area and favoured lower allocation to height growth and recruitment of light-demanding species with low wood density. The resultant large variation in tree biomass along the gradient shows the importance of determining site characteristics and including these characteristics when scaling up biomass estimates from stand to local or regional scales.
Keywords: biomass; community ecology; growth; mortality; productivity; soil waterlogging; topography; treefall; tropical moist forest; wood density
|
Gonzalez, M. A., Roger, A., Courtois, E. A., Jabot, F., Norden, N., Paine, C. E. T., et al. (2010). Shifts in species and phylogenetic diversity between sapling and tree communities indicate negative density dependence in a lowland rain forest. J. Ecol., 98(1), 137–146.
Abstract: P>1. As trees in a given cohort progress through ontogeny, many individuals die. This risk of mortality is unevenly distributed across species because of many processes such as habitat filtering, interspecific competition and negative density dependence. Here, we predict and test the patterns that such ecological processes should inscribe on both species and phylogenetic diversity as plants recruit from saplings to the canopy. 2. We compared species and phylogenetic diversity of sapling and tree communities at two sites in French Guiana. We surveyed 2084 adult trees in four 1-ha tree plots and 943 saplings in sixteen 16-m2 subplots nested within the tree plots. Species diversity was measured using Fisher's alpha (species richness) and Simpson's index (species evenness). Phylogenetic diversity was measured using Faith's phylogenetic diversity (phylogenetic richness) and Rao's quadratic entropy index (phylogenetic evenness). The phylogenetic diversity indices were inferred using four phylogenetic hypotheses: two based on rbcLa plastid DNA sequences obtained from the inventoried individuals with different branch lengths, a global phylogeny available from the Angiosperm Phylogeny Group, and a combination of both. 3. Taxonomic identification of the saplings was performed by combining morphological and DNA barcoding techniques using three plant DNA barcodes (psbA-trnH, rpoC1 and rbcLa). DNA barcoding enabled us to increase species assignment and to assign unidentified saplings to molecular operational taxonomic units. 4. Species richness was similar between saplings and trees, but in about half of our comparisons, species evenness was higher in trees than in saplings. This suggests that negative density dependence plays an important role during the sapling-to-tree transition. 5. Phylogenetic richness increased between saplings and trees in about half of the comparisons. Phylogenetic evenness increased significantly between saplings and trees in a few cases (4 out of 16) and only with the most resolved phylogeny. These results suggest that negative density dependence operates largely independently of the phylogenetic structure of communities. 6. Synthesis. By contrasting species richness and evenness across size classes, we suggest that negative density dependence drives shifts in composition during the sapling-to-tree transition. In addition, we found little evidence for a change in phylogenetic diversity across age classes, suggesting that the observed patterns are not phylogenetically constrained.
Keywords: APG II plus rbcL megatree; density dependence; DNA barcoding; French Guiana; phylogenetic diversity; species diversity; tropical plant communities
|
Barriault, I., Barabe, D., Cloutier, L., & Gibernau, M. (2010). Pollination ecology and reproductive success in Jack-in-the-pulpit (Arisaema triphyllum) in Quebec (Canada). Plant Biol., 12(1), 161–171.
Abstract: Pollination ecology and reproductive success of Jack-in-the-pulpit (Arisaema triphyllum) were studied in two natural populations in Quebec, Canada. Individual A. triphyllum plants can be of three types: male, female or bisexual. In both populations studied, the presence of bisexual inflorescences was not negligible (13%), where 'female' and 'male' bisexual plants were categorised according to the relative number of stamens and ovaries. 'Male bisexual' plants produce only pollen and 'female bisexual' plants produce only fruit. Hence, A. triphyllum is a true dioecious plant, as each plant only reproduces through either the male or the female function. 'Female bisexual' plants were equivalent to female plants in terms of visitation rate by insects, fructification rate and production of berries and seeds. Neither agamospermy in female plants nor self-pollination in 'female bisexual' plants was found, thus A. triphyllum relies on insects for cross-pollination. Despite the long flowering cycle, a low visitation rate was documented: only 20-40% of inflorescences were visited, according to gender, by a mean of 1.5 insects. In this study, Mycetophilidae represented the most generically diversified and abundant family, as well as the most efficient insect pollinator, especially the genera Docosia and Mycetophila.
Keywords: Araceae; bisexual inflorescence; deceptive pollination; Mycetophilidae; pollen load; Thysanoptera; visitation rates
|
Boisse, P., Aimene, Y., Dogui, A., Dridi, S., Gatouillat, S., Hamila, N., et al. (2010). Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming. International Journal of Material Forming, 3(Supplement 2), 1229–1240.
Abstract: The clear multi-scale structure of composite textile reinforcements leads to develop continuous and discrete approaches for their forming simulations. In this paper two continuous modelling respectively based on a hypoelastic and hyperelastic constitutive model are presented. A discrete approach is also considered in which each yarn is modelled by shell finite elements and where the contact with friction and possible sliding between the yarns are taken into account. Finally the semi-discrete approach is presented in which the shell finite element interpolation involves continuity of the displacement field but where the internal virtual work is obtained as the sum of tension, in-plane shear and bending ones of all the woven unit cells within the element. The advantages and drawbacks of the different approaches are discussed.
Keywords: Textile composites Forming simulations Continuous/discrete approaches Hyperelasticity Hypoelasticity Semi-discrete finite element
|
|
Vedel, V., Apostolou, Z., Arthur, W., Akam, M., & Brena, C. (2010). An early temperature-sensitive period for the plasticity of segment number in the centipede Strigamia maritima. Evol Dev, 12(4), 347–352.
|
Guerrero, R. J., Delabie, J. H. C., & Dejean, A. (2010). Taxonomic Contribution to the aurita Group of the Ant Genus Azteca (Formicidae: Dolichoderinae). J. Hymenopt. Res., 19(1), 51–65.
Abstract: We describe five new species in the aurita group of the genus Azteca: Azteca andreae sp. n. (French Guiana), Azteca diabolica sp. n. (Panama), Azteca laurae sp. n. (Brazil), Azteca linamariae sp. n. (Brazil and Colombia) and Azteca snellingi sp. n. (Panama). Four of these new species are based on gynes, while the last is based only on the worker caste. All of them bear the aurita group characteristics. The second taxon is remarkable, as it differs from all of the other members of the group in the exaggerated, horn-like extensions of the posterolateral vertex margins. Azteca snellingi sp. n. is named in honor of our colleague, Roy Snelling, in tribute to his life-long contribution to knowledge of the world of Hymenoptera. A key to all known species of the aurita group, based on gynes, is provided. We report also for the first time an intercast case for the genus Azteca, based on an Azteca schimperi specimen.
|
