Abstract: In this study, the corrosion of S355 carbon steel was monitored for 50 days in equatorial environment. The experiments were conducted under three complementary approaches in a natural environment: (i) bacterial diversity was assessed with Miseq sequencing, (ii) observations of the surface and identifications of deposit compounds were realised with scanning electron microscopy (SEM), Raman spectrometry and EDX analyses, (iii) electrochemical measurements were used to calculate corrosion rate and to identify the phenomena which control corrosion. The results showed that the bacterial population had changed over immersion time from a dominance of β-proteobacteria to α-proteobacteria. This evolution decreased charge transfer resistance at the metal/deposit from 41.6 to 20.8 Ω/cm2 in 50 days, caused an increase in the corrosion rate by a factor of 2, from 0.13 to 0.27 mm/year. Surface analyses showed a progressive appearance of MIC markers in the deposit such as iron sulphide and manganese oxides that were detected after 30 days of immersion in the natural environment. In conclusion, this study describes in detail, the first stage of MIC activity on carbon steel surface in an equatorial brackish water, under aerobic conditions. © 2016 Elsevier Ltd.

Abstract: Ethnopharmacological relevance Psidium acutangulum Mart. ex DC is a small tree used by the Wayana Amerindians from the Upper-Maroni in French Guiana for the treatment of malaria. Aim of the study In a previous study, we highlighted the in vitro antiplasmodial, antioxidant and anti-inflammatory potential of the traditional decoction of P. acutangulum aerial parts. Our goal was then to investigate on the origin of the biological activity of the traditional remedy, and eventually characterize active constituents. Materials and methods Liquid-liquid extractions were performed on the decoction, and the antiplasmodial activity evaluated against chloroquine-resistant FcB1 ([3H]-hypoxanthine bioassay) and 7G8 (pLDH bioassay) P. falciparum strains, and on a chloroquine sensitive NF54 ([3H]-hypoxanthine bioassay) P. falciparum strain. The ethyl acetate fraction (D) was active and underwent bioguided fractionation. All the isolated compounds were tested on P. falciparum FcB1 strain. In vitro anti-inflammatory activity (IL-1β, IL-6, IL-8, TNFα) of the ethyl acetate fraction and of an anti-Plasmodium active compound, was concurrently assessed on LPS-stimulated human PBMC and NO secretion inhibition was measured on LPS stimulated RAW murine macrophages. Cytotoxicity of the fractions and pure compounds was measured on VERO cells, L6 mammalian cells, PBMCs, and RAW cells. Results Fractionation of the ethyl acetate soluble fraction (IC50 ranging from 3.4 to <1 μg/mL depending on the parasite strain) led to the isolation of six pure compounds: catechin and five glycosylated quercetin derivatives. These compounds have never been isolated from this plant species. Two of these compounds (wayanin and guaijaverin) were found to be moderately active against P. falciparum FcB1 in vitro (IC50 5.5 and 6.9 μM respectively). We proposed the name wayanin during public meetings organized in June 2015 in the Upper-Maroni villages, in homage to the medicinal knowledge of the Wayana population. At 50 μg/mL, the ethyl acetate fraction (D) significantly inhibited IL-1β secretion (-46%) and NO production (-21%), as previously observed for the decoction. The effects of D and guiajaverin (4) on the secretion of other cytokines or NO production were not significant. Conclusions The confirmed antiplasmodial activity of the ethyl acetate soluble fraction of the decoction and of the isolated compounds support the previous results obtained on the P. acutangulum decoction. The antiplasmodial activity might be due to a mixture of moderately active non-toxic flavonoids. The anti-inflammatory activities were less marked for ethyl acetate fraction (D) than for the decoction. © 2016 Elsevier Ireland Ltd. All rights reserved.

Abstract: LiDAR data has been successfully used to estimate forest parameters such as canopy heights and biomass. Major limitation of LiDAR systems (airborne and spaceborne) arises from their limited spatial coverage. In this study, we present a technique for canopy height mapping using airborne and spaceborne LiDAR data (from the Geoscience Laser Altimeter System (GLAS)). First, canopy heights extracted from both airborne and spaceborne LiDAR were extrapolated from available environmental data. The estimated canopy height maps using Random Forest (RF) regression from airborne or GLAS calibration datasets showed similar precisions (~6 m). To improve the precision of canopy height estimates, regression-kriging was used. Results indicated an improvement in terms of root mean square error (RMSE, from 6.5 to 4.2 m) using the GLAS dataset, and from 5.8 to 1.8 m using the airborne LiDAR dataset. Finally, in order to investigate the impact of the spatial sampling of future LiDAR missions on canopy height estimates precision, six subsets were derived from the initial airborne LiDAR dataset. Results indicated that using the regression-kriging approach a precision of 1.8 m on the canopy height map was achievable with a flight line spacing of 5 km. This precision decreased to 4.8 m for flight line spacing of 50 km. © 2016 by the authors.

Abstract: Challenging evaluation of tropical forest biodiversity requires the reporting of taxonomic diversity but also the systematic characterization of wood properties in order to discover new promising species for timber industry. Among wood properties, the dimensional stability is regarded as a major technological characteristic to validate whether a wood species is adapted to commercial uses. Cell structure and organization are known to influence the drying shrinkage making wood density and microfibrils angle markers of choice to predict wood dimensional stability. On the contrary the role of wood extractive content remains unclear. This work focuses on the fast-growing tropical species Bagassa guianensis and we report herein a correlation between heartwood drying shrinkage and extractive content. Chemical extractions and shrinkage experiments were performed on separate wood twin samples to better evaluate correctly how secondary metabolites influence the wood shrinkage behaviour. Extractive content were qualitatively and quantitatively analysed using HPLC and NMR spectroscopy. We found that B guianensis heartwood has a homogeneous low shrinkage along its radius that could not be explained only by its basic density. In fact the low drying shrinkage is correlated to the high extractive content and a corrected model to improve the prediction of wood dimensional stability is presented. Additionally NMR experiments conducted on sapwood and heartwood extracts demonstrate that secondary metabolites biosynthesis occurs in sapwood thus revealing B. guianensis as a Juglans-Type heartwood formation. This work demonstrates that B. guianensis, a fast-growing species associated with high durability and high dimensional stability, is a good candidate for lumber production and commercial purposes. © 2016 Bossu et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Abstract: Essential oil from the Amazonian rosewood tree (Aniba rosaeodora Ducke) is valued as an important aromatic ingredient in luxury perfumes. Due to over-harvesting in recent decades, rosewood is now listed as an endangered species. Rosewood tree planting is now considered a viable alternative to logging as it can support both reforestation and sustainable agriculture thanks to sales of the essential oil extracted. We planted 605 rosewood trees in French Guiana from two seeds of local provenance, in a 5 445 m2 plot surrounded by primary forest. Nine years after planting, we assessed the effect of the position of the tree relative to the surrounding forest and of the seed provenance on dendrometric traits (height, circumference, above ground woody biomass) and hence on the yield of essential oil. Measurements were made on 99 trees. Average growth rates for the young trees were 0.7 m/year in height, 2.5 cm/year in stem circumference and 990.5 kg dry mass/ha/year in aboveground biomass, while essential oil yields ranged from 0.6% to 3.6% with a mean of 2.1%. The position of the tree relative to the surrounding forest was the main factor affecting tree growth and essential oil production: trees located close to the surrounding forest were significantly smaller and accumulated less essential oil due to the reduced availability of light. Seed provenance had less effect on dendrometric traits and essential oil yields. In conclusion, although planting practices will need to be adapted to avoid the edge effects of proximity to the forest, short-rotation cultivation of rosewood trees could be the optimum and most economically attractive system for the production of essential oil.