Faustin, M., Lebrini, M., Robert, F., & Roos, C. (2011). Corrosion studies of C38 steel by alkaloids extract of a tropical plant type. Int.J.Electrochem.Sci., 6(9), 4095–4113.
Abstract: Alkaloids extract of Aspidosperma album was tested as corrosion inhibitor for C38 steel in 1 M HCl by using polarization and electrochemical impedance spectroscopy (EIS). Potentiodynamic polarization curves indicated that the plant extract behaves as mixed-type inhibitors. Impedance measurements showed that the double-layer capacitance decreased and charge-transfer resistance increased with increase in the inhibitors concentration and hence increasing in inhibition efficiency. The effect of temperature on the corrosion behavior of C38 steel in 1 M HCl with and without addition of plant extract was studied in the temperature range 25 – 55°C. The adsorption of the inhibitor molecules was in accordance with the Langmuir adsorption isotherm. The results obtained show that this plant extract could serve as an effective inhibitor for the corrosion of C38 steel in hydrochloric acid. © 2011 by ESG.
Keywords: Acidic media; C38 steel; Corrosion inhibitor; Plant extract
|
Lecante, A., Robert, F., Lebrini, M., & Roos, C. (2011). Inhibitive Effect of Siparuna Guianensis Extracts on the Corrosion of Low Carbon Steel in Acidic Media. Int.J.Electrochem.Sci., 6(11), 5249–5264.
Abstract: The present study examines the effect of alkaloids extract from Siparuna guianensis leaves and stems on corrosion of C38 steel in 0.1 M HCl using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization technique and Raman spectroscopy. The protection efficiency is better with stems alkaloids extract. The inhibition was assumed to occur via adsorption of inhibitor molecules on the metal surface. The influence of stems alkaloids extract concentration on corrosion of low carbon steel in 0.1 M HCl was studied. The inhibition efficiency obtained from impedance and polarization measurements was in a good agreement and was found to increase with increasing concentration of alkaloids extract up to 50 mg/L for stems extract. The adsorption of the extract on the low carbon steel surface obeys the Langmuir adsorption.
Keywords: Alkaloids extract; corrosion inhibition; C38 steel; EIS; raman spectroscopy
|
Ntienoue, J. K., Reguer, A., Robert, F., Nait-Rabah, O., & Roos, C. (2013). Electrochemical behaviour of a super austenitic stainless steel in amazonian aqueous environment. Int.J.Electrochem.Sci., 8(4), 4761–4775.
Abstract: The electrochemical behaviour of 254 SMO super austenitic stainless steel in natural seawater collected from river mouth of French Guiana was investigated. A comparative study of samples immersed during 22 days in this environment was made including influences of scraped biofilm introduced in experiments and of stirring. Electrochemical measurements – open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and linear polarisation (LP) – are used to characterize the metal/medium interface included biofilms adhesion. The EDX analysis (EDAX system) shows that the chemical composition of adhered biofilm consists mostly of iron, oxygen, silicon and aluminium and seem preferentially bind on metal defects. © 2013 by ESG.
Keywords: Cyclic voltammetry; Eis; Esem; Passive films; Stainless steel
|
Salvin, P., Ondel, O., Roos, C., & Robert, F. (2015). Energy harvest with mangrove benthic microbial fuel cells. Int J Energy Res, 39(4), 543–556.
Abstract: Benthic microbial fuel cells (BMFCs) are continuous electricity generators using electroactive microorganisms and organic matter from aquatic environment, respectively, as catalysts and substrate. In this paper, first a low-cost PVC-made structure is constructed to harvest electricity from mangrove environment located in French Guiana. An in situ BMFC has given power density of 30mW/m2 of the anodic surface area. This performance has been confirmed by experience in laboratory where inter-electrode distance and electrode surface area appeared to be power increasing factors. However, the output power of one BMFC is not used to supply real devices such as autonomous sensors. Second, to meet this expectation, in parallel and in series associations were considered. These associations were made in order to increase the output voltage and consequently the power, to reach levels that can supply small sensors (about 3V). Finally, to improve the performance of the series association and to avoid the voltage reversal phenomenon, a voltage balancing circuit was simulated and added to the series connections. With balancing method, the cell voltage of BMFCs can be equalized, and the performances can be improved. This allows an optimal energy harvesting and a better global efficiency of the set.
Keywords: Balancing circuit; Benthic microbial fuel cell; Efficiency; Energy harvesting
|
Boisse, P., Aimene, Y., Dogui, A., Dridi, S., Gatouillat, S., Hamila, N., et al. (2010). Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming. International Journal of Material Forming, 3(Supplement 2), 1229–1240.
Abstract: The clear multi-scale structure of composite textile reinforcements leads to develop continuous and discrete approaches for their forming simulations. In this paper two continuous modelling respectively based on a hypoelastic and hyperelastic constitutive model are presented. A discrete approach is also considered in which each yarn is modelled by shell finite elements and where the contact with friction and possible sliding between the yarns are taken into account. Finally the semi-discrete approach is presented in which the shell finite element interpolation involves continuity of the displacement field but where the internal virtual work is obtained as the sum of tension, in-plane shear and bending ones of all the woven unit cells within the element. The advantages and drawbacks of the different approaches are discussed.
Keywords: Textile composites Forming simulations Continuous/discrete approaches Hyperelasticity Hypoelasticity Semi-discrete finite element
|
Vedel, V., & Arthur, W. (2009). Character changes during the early post-embryonic development of the centipede Strigamia maritima (Leach, 1817) (Chilopoda: Geophilomorpha). International Journal of Myriapodology, 2(1), 53–61.
Abstract: For many kinds of ecological, evolutionary and developmental study, it is important to be able to describe the life-history of the individuals of a particular species/population. In the case of myriapods and other arthropods, this involves separating the different life-history stages (or stadia or instars) that are separated by moults. However, it has recently been pointed out that in the earliest post-embryonic stages the cuticle is still quite flexible; this means that visible external developmental changes can occur between moults as well as during them. Here, we provide evidence for such inter-moult changes in the coastal geophilomorph centipede Strigamia maritima. The character states studied enable finer-scale resolution of early post-embryonic forms than was hitherto possible. Specifically, we describe five transitional forms during a period in which just two (Peripatoid and Foetus) have traditionally been recognized
Keywords: MOULT DEVELOPMENT ARTHROPOD POST-EMBRYONIC STAGE MORPHOLOGICAL CHANGE MYRIAPOD CENTIPEDE EVO-DEVO
|
Maia, A. C. D., Schlindwein, C., Navarro, D. M. A. F., & Gibernau, M. (2010). Pollination of Philodendron Acutatum (Araceae) in the Atlantic Forest of Northeastern Brazil: A Single Scarab Beetle Species Guarantees High Fruit Set. Int. J. Plant Sci., 171(7), 740–748.
Abstract: Philodendron acutatum (Araceae) is a hemiepiphyte common to the Atlantic Forest of northeastern Brazil. In two localities, we studied the species' breeding system and associations with flower-visiting insects, along with an analysis of its floral scent composition. The fruit set of self-incompatible P. acutatum was high, more than 90%, and inflorescences were exclusively pollinated by one species of scarab beetle, Cyclocephala celata (Scarabaeidae, Dynastinae). Pollinators are drawn toward the inflorescences at dusk by strong floral fragrances given off during the female phase of anthesis, along with endogenous heating of the spadix, whose temperatures were recorded at more than 11 degrees C above ambient air. Two other species of flower-visiting Cyclocephala were also consistently recovered in blacklight trappings during the flowering period of P. acutatum. The fact that only C. celata was found in association with P. acutatum suggests a local reproductive dependence of the plant to this scarab beetle species. Dihydro-beta-ionone and 2-hydroxy-5-methyl-3-hexanone, a rare volatile molecule so far unreported as a floral compound, together accounted for more than 97% of the unique scent composition of P. acutatum and might be involved in specific attraction of C. celata.
Keywords: Cyclocephala; floral volatiles; pollination specificity; reproductive success; thermogenesis
|
Gond, V., Bartholome, E., Ouattara, F., Nonguierma, A., & Bado, L. (2004). Monitoring and mapping of waters and wetlands in arid regions using the SPOT-4 VEGETATION imaging system. Int. J. Remote Sens., 25(5), 987–1004.
Abstract: Monitoring the state of small waterbodies and wetlands is very useful in dry regions, because their existence is entirely controlled by the rhythm of local rainfall. On VEGETATION image colour composites, waterbodies and marshy vegetation show up clearly. Yet simple image classification does not yield sufficiently good results because 'spectral signatures' vary significantly together with the ecological conditions of these surfaces. A robust contextual procedure taking into account local contrast was successfully developed and tested. A systematic validation was carried out and a map of waterbodies and wetlands was produced for Burkina Faso and neighbouring regions.
|
Mahoui, S., Moulay, M. S., & Omrane, A. (2020). Finite element approach to linear parabolic pointwise control problems of incomplete data. International Journal of Systems Science, 51(14), 2597–2609.
Abstract: In this paper we give a priori error estimates for finite element approximations of linear parabolicproblems with pointwise control and incomplete data. We discretise the optimal control problemby using piecewise linear and continuous finite elements for the space discretisation of the state,and we use the backward Euler scheme for time discretisation. We prove a priori error estimates forthe state, the adjoint-state as well as for the low-regret pointwise optimal control.
Keywords: Optimal control problem ; low-regret control ; pointwise control ; finite element method ; a priori error estimates
|
|
Djenontin Tindo, S., Amusant, N., Dangou, J., Wotto, D. V., Avlessi, F., Dahouénon-Ahoussi, E., et al. (2012). Screening of Repellent, Termiticidal and Preventive activities on Wood, of Azadirachta indica and Carapa procera (Meliaceae) seeds oils. ISCA J. Biological Sci., 1(3), 25–29.
|
