Home | [31–40] << 41 42 43 44 45 46 47 48 49 50 >> [51–60] |
Ghislain, B., Alméras, T., Prunier, J., & Clair, B. (2019). Contributions of bark and tension wood and role of the G-layer lignification in the gravitropic movements of 21 tropical tree species. Ann. Forest Sci., 76(4), 107.
Abstract: Key message: Gravitropic movements in angiosperm woody stems are achieved through the action of bark and/or wood motor, depending on the bark and wood fibre anatomy (with trellis structure or not; with G-layers or not). Bark motor is as efficient as wood motor to recover from tilting in young trees of 21 tropical species. Context: Angiosperm trees produce tension wood to control their orientation through changes in stem curvature. Tension wood is classified into 3 anatomical groups: with unlignified G-layer, with lignified G-layer and without G-layer. Aims: This study aimed at assessing whether this anatomical diversity reflects a diversity in efficiency of gravitropic movement. Methods: The study was conducted on tropical seedling from the three anatomical groups. Seedlings were staked and grown tilted. At the end of the experiment, changes in curvature when releasing the stem from the stake and when removing bark were measured. Three parameters were computed to compare the global efficiency of gravitropism (stem gravitropic efficiency) and the specific efficiency of motor mechanism based on wood (maturation strain of tension wood) and bark (standardized debarking curvature). Results: The maturation strain of tension wood was similar between species with unlignified and lignified G-layer. Species without G-layer exhibited low maturation strain and large debarking curvature, showing they rely on bark for gravitropism. Bark and wood achieved similar motor efficiency. Conclusion: Lignin does not affect the generation of tensile stress in the G-layer. Bark can be as efficient as wood as a motor of gravitropic movements. © 2019, The Author(s).
Keywords: Bark; Biomechanics; G-layer; Lignification; Tension wood; Tropical rainforest; Magnoliophyta
|
Paine, C. E. T., Stahl, C., Courtois, E. A., Patino, S., Sarmiento, C., & Baraloto, C. (2010). Functional explanations for variation in bark thickness in tropical rain forest trees. Funct. Ecol., 24(6), 1202–1210.
Abstract: P>1. The complex structure of tree bark reflects its many functions, which include structural support as well as defence against fire, pests and pathogens. Thick bark, however, might limit respiration by the living tissues of the trunk. Nevertheless, little research has addressed community-level variation in bark thickness, and to the best of our knowledge, no one has tested multiple hypotheses to explain variation in bark thickness. 2. We conducted an extensive survey of bark thickness within and among species of trees in the tropical rain forests of French Guiana. Trunk bark thickness increased by 1 center dot 2 mm per 10 cm increase in stem diameter, and varied widely at all taxonomic levels. Mean trunk bark thickness was 4 center dot 5 mm (range: 0 center dot 5-29 mm), which was less that found in two Amazonian rain forests in previous studies. This survey of bark thickness should be of use for forest management since tree survival through fire is strongly predicted by bark thickness. 3. We combined the survey data with multiple datasets to test several functional hypotheses proposed to explain variation in bark thickness. We found bark to provide an average of 10% of the flexural rigidity of tree stems, which was substantially less than that found in the only other study of bark stiffness. Bark thickness was uncorrelated with species' association with fire-prone habitats, suggesting that the influence of fire on bark thickness does not extend into moist Forests. There was also little evidence that bark thickness is affected by its function as a defence against herbivory. Nor was there evidence that thick bark limits trunk respiration. 4. A re-analysis of previously collected anatomical data indicated that variation in rhytidome (non-conducting outer bark) thickness explains much of the variation in overall bark thickness. As rhytidome is primarily involved in protecting the living tissues of the trunk, we suggest that bark thickness is driven mostly by its defensive function. 5. Functional explanations for the variation in bark thickness were not clear-cut. Nevertheless, this study provides a foundation for further investigation of the functional bases of bark in tropical trees.
Keywords: bark thickness; fire ecology; flexural rigidity; herbivore defence; periderm; rhytidome; trunk respiration
|
Lehnebach, R., Doumerc, L., Clair, B., & Alméras, T. (2020). Mechanical stress in the inner bark of 15 tropical tree species and the relationship with anatomical structure. Bot., 98(1), 1–8.
Abstract: Recent studies have shown that the inner bark is implicated in the postural control of inclined tree stems through the interaction between wood radial growth and tangential expansion of a trellis fiber network in bark. Assessing the taxonomic extent of this mechanism requires a screening of the diversity in bark anatomy and mechanical stress. The mechanical state of bark was measured in 15 tropical tree species from various botanical families on vertical mature trees, and related to the anatomical structure of the bark. Significant tensile or compressive longitudinal stresses were observed in the stems of most species. Tensile longitudinal stress was observed in various botanical families and was always associated with fibers arranged in a trellis-like structure and strong dilatation of rays. The highest tensile stress was recorded in species with gelatinous fibers forming a treillis. Compressive stress was typically associated with a large amount of sclereids in the bark, supporting the differentiation of sclereids as a potential origin of the generation of longitudinal compressive stresses in bark. In species exhibiting both a fibrous trellis structure and a significant amount of sclereids, the sign of longitudinal stress may depend on the balance between these two mechanisms.
Keywords: Bark anatomical structure; Mechanical stress; Sclereids; Secondary phloem; Tree biomechanics; Tropical species
|
Roy, M., Vasco-Palacios, A., Geml, J., Buyck, B., Delgat, L., Giachini, A., et al. (2017). The (re)discovery of ectomycorrhizal symbioses in Neotropical ecosystems sketched in Florianópolis. New Phytologist, 214(3), 920–923.
Keywords: barcoding; biodiversity; ectomycorrhizal fungi; ectomycorrhizal roots; ectomycorrhizal symbioses; fruitbodies; Neotropical ecosystems
|
Rockwell, C. A., Kainer, K. A., d'Oliveira, M. V. N., Staudhammer, C. L., & Baraloto, C. (2014). Logging in bamboo-dominated forests in southwestern Amazonia: Caveats and opportunities for smallholder forest management. For. Ecol. Manage., 315, 202–210.
Abstract: Guadua sarcocarpa and Guadua weberbaueri (Poaceae: Bambuseae) have a negative influence on tree regeneration and recruitment in bamboo-dominated forests of southwestern Amazonia. The lack of advanced regeneration and sparse canopy in this forest type present a considerable challenge for developing sustainable timber management plans. We conducted field studies in the Porto Dias Agroextractive Settlement Project in Acre, Brazil to assess influences of logging in bamboo-dominated forest sites. Taxonomic composition, stand structure, aboveground biomass, commercial timber volume, and commercial tree seedling and bamboo culm density were compared between five logged vs. unlogged sites in different landholdings, using modified 0.5. ha Gentry plots. No differences in taxonomic composition, aboveground biomass, adult and juvenile stem density, or woody seedling and bamboo culm density were detected between paired logged and unlogged sites. Commercial timber volume, however, was reduced by almost two-thirds in logged plots, suggesting that long-term timber management goals in this forest type are compromised since so few future crop trees remained onsite. Our findings indicate that in order to maximize local management objectives, community forest managers must approach logging in bamboo-dominated forests with caution. We suggest an integration of non-timber forest product extraction with low harvest intensity and low-impact logging, tending of natural regeneration, and diversification of commercial species. © 2014 Elsevier B.V.
Keywords: Bamboo; Community forest management; Guadua; Logging; Timber management; Tropical forest
|
Rockwell, C. A., Kainer, K. A., Staudhammer, C. L., & Baraloto, C. (2007). Future crop tree damage in a certified community forest in southwestern Amazonia. For. Ecol. Manage., 242(2-3), 108–118.
Abstract: Field studies in Acre, Brazil assessed logging impacts of a certified community timber management project. The main objectives of the study were: (1) to determine if damage incidence to future crop trees (FCTs; >= 20 cm diameter at breast height (dbh)) differs between (a) forest with and without bamboo (Guadua spp.), and (b) trees with and without lianas; (2) to what extent harvesting can be conducted more intensely (m(3)ha(-1)), without incurring greater FCT damage; and (3) to what extent marking diminishes FCT damage. Full inventories of FCTs of 50 commercial species complexes were conducted before and after logging in 50 m-radius zones of impact around each designated harvest tree in three 10 ha (200 m x 500 m) logging blocks. We also mapped all forested areas potentially influenced by logging, including skid trails, log landings and felling gaps, throughout the 30 ha logged. More than 28% of the forest area was disturbed by logging, with 12.1% in skid trails and 16.8% in gap clearings, indicating that the forest gap mosaic can be significantly altered even when reduced-impact logging guidelines are followed. Overall, 15% of FCTs inventoried were damaged. Damage rates were not significantly reduced by marking treatment, location in bamboo-dominated forest, or liana load on FCT damage. Harvest intensity did not influence the probability of FCT damage. For future studies, it would be prudent to address impacts of timber extraction on other livelihood activities, such as non-timber forest product collection, particularly in such regions as the Brazilian Amazon, where many communities are attempting to integrate a suite of income-generating activities. (C) 2007 Elsevier B.V. All rights reserved.
Keywords: bamboo; community forest management; forest certification; Guadua; liana; marking; reduced-impact logging; RIL; timber management; tropical forest
|
Salvin, P., Ondel, O., Roos, C., & Robert, F. (2015). Energy harvest with mangrove benthic microbial fuel cells. Int J Energy Res, 39(4), 543–556.
Abstract: Benthic microbial fuel cells (BMFCs) are continuous electricity generators using electroactive microorganisms and organic matter from aquatic environment, respectively, as catalysts and substrate. In this paper, first a low-cost PVC-made structure is constructed to harvest electricity from mangrove environment located in French Guiana. An in situ BMFC has given power density of 30mW/m2 of the anodic surface area. This performance has been confirmed by experience in laboratory where inter-electrode distance and electrode surface area appeared to be power increasing factors. However, the output power of one BMFC is not used to supply real devices such as autonomous sensors. Second, to meet this expectation, in parallel and in series associations were considered. These associations were made in order to increase the output voltage and consequently the power, to reach levels that can supply small sensors (about 3V). Finally, to improve the performance of the series association and to avoid the voltage reversal phenomenon, a voltage balancing circuit was simulated and added to the series connections. With balancing method, the cell voltage of BMFCs can be equalized, and the performances can be improved. This allows an optimal energy harvesting and a better global efficiency of the set.
Keywords: Balancing circuit; Benthic microbial fuel cell; Efficiency; Energy harvesting
|
Royer, M., Herbette, G., Eparvier, V., Beauchene, J., Thibaut, B., & Stien, D. (2010). Secondary metabolites of Bagassa guianensis Aubl. wood: A study of the chemotaxonomy of the Moraceae family. Phytochemistry, 71(14-15), 1708–1713.
Abstract: In order to explain the durability of the Moraceae plant family, phytochemistry of Bagassa guianensis was performed. Ethyl acetate extract was obtained from the heartwood and 18 secondary metabolites were isolated, including 6 moracins [6-O-methyl-moracin M, 6-O-methyl-moracin N and moracin Z; previously identified: moracin M, moracin N and moracin P], 8 stilbenoids [presently identified: (-)-epialboctalol and arachidin 4; previously identified: alboctalol, trans-resveratrol, arachidin 2, trans-oxyresveratrol and artogomezianol], 3 previously identified flavonoids, steppogenin, katuranin and dihydromorin, beta-sitosterol and resorcinol. Previous studies suggest that stilbenoids are responsible for the natural durability of wood. Our study has determined that B. guianensis is closely related to Morus sp. in phylogeny and should be included in the Moreae sensu stricto tribe of the Moraceae family. (C) 2010 Elsevier Ltd. All rights reserved.
Keywords: Bagassa guianensis; Moraceae; Secondary metabolites; Stilbenes; Moracins; Flavonoids; Natural durability
|
Maron, P. A., Schimann, H., Ranjard, L., Brothier, E., Domenach, A. M., Lensi, R., et al. (2006). Evaluation of quantitative and qualitative recovery of bacterial communities from different soil types by density gradient centrifugation. Eur. J. Soil Biol., 42(2), 65–73.
Abstract: Extracting and purifying a representative fraction of bacteria from soil is necessary for the application of many techniques of microbial ecology. Here the influence of different soil types on the quantitative and qualitative recovery of bacteria by soil grinding and Nycodenz density gradient centrifugation was investigated. Three soils presenting contrasted physicochemical characteristics were used for this study. For each soil, the total (AODC: acridine orange direct count) and culturable (cfa: colony-forming units) bacterial densities were measured in three distinct fractions: (i) the primary soil, (ii) the soil pellet (soil remaining after centrifugation), and (iii) the extracted cells. The automated-ribosomal intergenic spacer analysis (A-RISA) was used to characterize the community structure directly from the DNA extracted from each fraction. The physicochemical characteristics of soils were found to influence both the efficiency of bacterial cell recovery and the representativeness of the extracted cells in term of community structures between the different fractions. Surprisingly, the most representative extracted cells were obtained from the soil exhibiting the lowest efficiency of cell recovery. Our results demonstrated that quantitative and qualitative cell recovery using Nycodenz density gradient centrifugation are not necessarily related and could be differentially biased according to soil type. (c) 2006 Elsevier SAS. All rights reserved.
Keywords: bacterial community; soil; density gradient; DNA fingerprint
|
Hattenschwiler, S., Fromin, N., & Barantal, S. (2011). Functional diversity of terrestrial microbial decomposers and their substrates. C. R. Biol., 334(5-6), 393–402.
Abstract: The relationship between biodiversity and biogeochemical processes gained much interest in light of the rapidly decreasing biodiversity worldwide. In this article, we discuss the current status, challenges and prospects of functional concepts to plant litter diversity and microbial decomposer diversity. We also evaluate whether these concepts permit a better understanding of how biodiversity is linked to litter decomposition as a key ecosystem process influencing carbon and nutrient cycles. Based on a literature survey, we show that plant litter and microbial diversity matters for decomposition, but that considering numbers of taxonomic units appears overall as little relevant and less useful than functional diversity. However, despite easily available functional litter traits and the well-established theoretical framework for functional litter diversity, the impact of functional litter diversity on decomposition is not yet well enough explored. Defining functional diversity of microorganisms remains one of the biggest challenges for functional approaches to microbial diversity. Recent developments in microarray and metagenomics technology offer promising possibilities in the assessment of the functional structure of microbial communities. This might allow significant progress in measuring functional microbial diversity and ultimately in our ability to predict consequences of biodiversity loss in the decomposer system for biogeochemical processes. (C) 2011 Academie des sciences. Published by Elsevier Masson SAS. All rights reserved.
Keywords: Bacteria; Biogeochemical cycles; Decomposition; Dissimilarity; Ecosystem functioning; Functional diversity indices; Fungi; Leaf litter
|