Bleron, L., Duchanois, G., & Thibaut, B. (2008). Characteristic properties of embedding strength for the nailing of the gonfolio rose (Qualea rosea Aubl.). Holzforschung, 62(1), 86–90.
Abstract: Experimental results are presented with single nail joints of gonfolo rose which were loaded at different grain angles and compared to results obtained by Eurocode V. A wide range of embedding strength tests was conducted. The embedding behaviour across the grain was also investigated with a specific test apparatus. The results were analysed and modelled in terms of strength. Initial loading and unloading stiffness of the timber have been taken into account. The embedment strength of the nails varied according to the angle between the direction of loading and that to the grain. This work is part of a larger research project to establish a computer program for the prediction of stiffness and limit strengths of all timber-to-timber and timber-to-steel joints.
Keywords: embedding strength; Eurocode V; nail
|
Marchal, R., Mothe, F., Denaud, L. E., Thibaut, B., & Bleron, L. (2009). Cutting forces in wood machining – Basics and applications in industrial processes. A review COST Action E35 2004-2008: Wood machining – micromechanics and fracture. Holzforschung, 63(2), 157–167.
Abstract: The data available in the literature concerning wood cutting forces permits to build models or to simulate the main wood machining processes ( milling, sawing, peeling, etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimise cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: ( 1) providing data to optimise the settings for a given operation ( batch approach), and ( 2) building predictive models that could be the basis of an online control system for the machining processes ( interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With a focus on potential industrial applications, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Although not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technological knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
Keywords: cutting forces; online control; peeling process; physico-mechanical model; sound; vibrations; wood industry; wood machining
|
Clair, B., Jaouen, G., Beauchene, J., & Fournier, M. (2003). Mapping radial, tangential and longitudinal shrinkages and relation to tension wood in discs of the tropical tree Symphonia globulifera. Holzforschung, 57(6), 665–671.
Abstract: A method for measuring shrinkage resulting from drying in the three anisotropic directions is developed and tested. Measurements are performed on sawn discs, a technique which simplifies preparation and enables large numbers of measurements. Shrinkage values can be represented as a map of the disc surface. The results indicate that comparisons between shrinkage distribution and tension wood distribution on the discs show a clear relationship and can be measured with relatively high accuracy in reference to the shrinkage map. In the long term, this method could be useful in the timber industry as a means for choosing the direction in which logs are cut depending on their type of wood composition.
Keywords: drying shrinkage; tension wood; Symphonia globulifera L. f.
|
Almeras, T., Gril, J., & Yamamoto, H. (2005). Modelling anisotropic maturation strains in wood in relation to fibre boundary conditions, microstructure and maturation kinetics. Holzforschung, 59(3), 347–353.
Abstract: A generalisation of existing mechanical models is proposed to account for the relation between wood macroscopic properties and fibre microstructure and chemical composition. It is applied to understanding of the origin of anisotropic maturation strains measured at the outermost surface of the xylem. Various assumptions are considered for boundary conditions of the fibre during the progressive maturation process and are applied to experimental data from the literature. Assumptions that the fibre is fully restrained in displacement, or fully unrestrained or unrestrained in the transverse direction only are all incompatible with observations. Indeed, within the tree, the fibre is restrained in the longitudinal and tangential directions, but unrestrained in the radial direction towards the bark. Mixed boundary conditions must be introduced to correctly simulate both longitudinal and tangential maturation strains. In the context of an analytical axisymmetric model, this is estimated by considering a parameter of partial release of tangential stress during maturation. Consistence with data and with finite element computation in the case of a square fibre confirmed that, because of the unrestrained radial condition, a large part of the tangential maturation stress is released in situ.
Keywords: anisotropy; boundary conditions; cell-wall maturation; growth strain; multilayer model; residual stress; wood fibre
|
Clair, B., Ruelle, J., & Thibaut, B. (2003). Relationship between growth stress, mechanical-physical properties and proportion of fibre with gelatinous layer in chestnut (Castanea sativa Mill.). Holzforschung, 57(2), 189–195.
Abstract: A range of mechanical and physical properties were determined for 96 specimens of chestnut wood and for wood types ranging from compression to tension wood; tests included (1) growth stress, (2) longitudinal Young's modulus in green and air-dried states (3) shrinkage in longitudinal and tangential directions. Anatomical observations permitted determination of the proportion of fibres with a gelatinous layer. The influence of these atypical fibres on macroscopic wood properties is examined and discussed. A basic model is proposed to determine their properties in theoretically isolated conditions.
Keywords: growth stress; longitudinal Young's modulus; shrinkage; normal wood; tension wood; gelatinous layer; Castanea Sativa
|
Campillo, F., & Rossi, V. (2009). Convolution Particle Filter for Parameter Estimation in General State-Space Models. IEEE Trans. Aerosp. Electron. Syst., 45(3), 1063–1072.
Abstract: The state-space modeling of partially observed dynamical systems generally requires estimates of unknown parameters. The dynamic state vector together with the static parameter vector can be considered as an augmented state vector. Classical filtering methods, such as the extended Kalman filter (EKF) and the bootstrap particle filter (PF), fail to estimate the augmented state vector. For these classical filters to handle the augmented state vector, a dynamic noise term should be artificially added to the parameter components or to the deterministic component of the dynamical system. However, this approach degrades the estimation performance of the filters. We propose a variant of the PF based on convolution kernel approximation techniques. This approach is tested on a simulated case study.
|
Latouche-Hallé, C., Ramboer, A., Bandou, E., Caron, H., & Kremer, A. (2003). Nuclear and chloroplast genetic structure indicate fine-scale spatial dynamics in a neotropical tree population. Heredity, 91(2), 181–190.
Abstract: Dicorynia guianensis is a canopy tree, endemic to the tropical rain forest of French Guiana. We compared generational and spatial genetic structure for maternally and biparentally inherited markers in two cohorts (adult and seedling) in order to infer processes shaping the distribution of genetic diversity. The study was conducted on a 40 ha study plot located at Paracou near Kourou, where 172 adults trees and 375 saplings were sampled. Aggregation of trees was therefore suggested at different distances, ranging from 100 to 400 m. There was a strong link between demographic and genetic spatial structures at small distances (less than 100 m) that is likely to be the consequence of restricted seed dispersal. Genetic differentiation was more pronounced between spatial aggregates than between cohorts. Despite the spatial differentiation, the species was able to maintain high levels of diversity for maternal genomes, suggesting rapid turnover of aggregates. Spatial autocorrelation was larger for chloroplast than nuclear markers indicating a strong asymmetry between pollen and seed flow. Fixation indices indicated a lower heterozygote deficiency for the adults, maybe because of gradual elimination of selfed trees. Genetic relatedness at lower distances was higher in adult trees than in saplings, as a result of generation overlapping in the adult cohort. Overall, our results confirm earlier biological knowledge about the dispersion mechanisms of the species, and lead to an enhanced role of spatial processes in the dynamics of genetic diversity of D. guianensis.
Keywords: Dicorynia guianensis; Gene flow; Genetic differentiation; Microsatellites; Spatial analysis; Tropical tree; gene flow; genetic structure; population genetics; spatial analysis; tree; tropical forest; Cell Nucleus; Chloroplasts; Cohort Studies; DNA, Plant; French Guiana; Genetic Markers; Pollen; Population Dynamics; Seeds; Trees; Variation (Genetics); French Guiana; Dicorynia guianensis; Embryophyta
|
Bourreau, D., Aimene, Y., Beauchene, J., & Thibaut, B. (2013). Feasibility of glued laminated timber beams with tropical hardwoods. Eur. J. Wood Wood Prod., 71(5), 653–662.
Abstract: A feasibility study of glulam was carried out in French Guiana using local wood species. The aim was to determine gluing parameters affording satisfactory behaviour to manufactured glulam in a tropical climate. Three abundant wood species, with special properties, were selected for the study and resorcinol-phenol-formaldehyde resin was used for bonding. Three industrial parameters were considered: adhesive spread rate, closed assembly time and gluing pressure. Delamination and shearing tests were carried out in accordance with European Standards. The tests revealed the influence of wood properties and manufacturing parameters on joint resistance. In fact, the results showed that specific gravity and the shrinkage coefficient greatly influenced the gluing step. Indeed, wood with a medium specific gravity needed more adhesive and more pressure than wood with a high specific gravity. In addition, planing and lamella thickness were found to affect glue joint resistance. © 2013 Springer-Verlag Berlin Heidelberg.
|
Dezerald, O., Talaga, S., Leroy, C., Carrias, J. - F., Corbara, B., Dejean, A., et al. (2014). Environmental determinants of macroinvertebrate diversity in small water bodies: Insights from tank-bromeliads. Hydrobiologia, 723(1), 77–86.
Abstract: The interlocking leaves of tank-forming bromeliads (Bromeliaceae) collect rainwater and detritus, thus creating a freshwater habitat for specialized organisms. Their abundance and the possibility of quantifying communities with accuracy give us unparalleled insight into how changes in local to regional environments influence community diversity in small water bodies. We sampled 365 bromeliads (365 invertebrate communities) along a southeastern to northwestern range in French Guiana. Geographic locality determined the species pool for bromeliad invertebrates, and local environments determined the abundance patterns through the selection of traits that are best adapted to the bromeliad habitats. Patterns in community structure mostly emerged from patterns of predator species occurrence and abundance across local-regional environments, while the set of detritivores remained constant. Water volume had a strong positive correlation with invertebrate diversity, making it a biologically relevant measure of the pools' carrying capacity. The significant effects of incoming detritus and incident light show that changes in local environments (e.g., the conversion of forest to cropping systems) strongly influence freshwater communities. Because changes in local environments do not affect detritivores and predators equally, one may expect functional shifts as sets of invertebrates with particular traits are replaced or complemented by other sets with different traits. © 2013 Springer Science+Business Media Dordrecht.
Keywords: Freshwater biodiversity; Linear mixed effect modelling; Microcosms; Phytotelmata; Ponds
|
Céréghino, R., Corbara, B., Leroy, C., & Carrias, J. - F. (2020). Ecological determinants of community structure across the trophic levels of freshwater food webs: a test using bromeliad phytotelmata. Hydrobiologia, 847(2), 391–402.
Abstract: Understanding the relative importance of habitat and biotic drivers on community assembly across food web components is an important step towards predicting the consequences of environmental changes. Because documenting entire food webs is often impractical, this question has been only partially investigated. Here, we partitioned variation in species assemblages of the major components of tank bromeliad food webs (bacteria, algae, protozoans, detritivorous and predatory invertebrates) into habitat and biotic determinants and examined the influence of habitat variables and predator or prey abundance on all taxonomic assemblages. Ecological determinism of assemblage structure ranged from weak in bacteria (< 10% of the explained variance) to strong in predatory invertebrates (90%). Habitat features and canopy openness significantly influenced species assemblages; however, prey or predator density had far and away the most significant structuring effects. If biotic forces are at least as important as the abiotic forces while the importance of stochasticity declines towards upper trophic levels, then trophic levels could respond differently to natural or anthropogenic disturbance and to shifts in species distributions. The effects of such differential responses on food web reconfiguration, however, remain to be elucidated. © 2019, Springer Nature Switzerland AG.
Keywords: Environmental filtering; Functional group; Neotropical; Niche; Trophic interactions; alga; assembly rule; bacterium; community structure; ecological modeling; environmental conditions; food web; freshwater ecosystem; functional group; Neotropic Ecozone; niche; protozoan; taxonomy; trophic interaction; trophic level; algae; Invertebrata; Protozoa
|
