Abstract: Few studies have been conducted about relation between cellulose parameters and biomechanical properties of wood in tropical angiosperms species. For this purpose, on 13 trees from 3 species of French Guyana tropical rainforest in a clear active process of restoring verticality, i) growth strains were measured in situ in order to determine the occurrence of tension wood within samples and ii) cellulose structural parameters were estimated on all the samples using X-ray diffraction method. Crystallite size was estimated from the full-width at half-maximum of the Miller index (002) arc diffraction and angle T was measured following Cave's method. Relationships between these parameters and growth stresses were good and the variations between normal and tension wood were significant, i. e. a lower angle T and a larger crystallite size in tension wood. In order to have a good estimation of the microfibril angle in the main layer of the secondary wall for each species, an experimental calibration was done between angle T and microfibril angle observed with scanning electron microscopy.

Abstract: Tank-bromeliads are discrete habitats which contain distinct aquatic communities, and which commonly occur in the neotropics. Because they span a broad range of ecological gradients in terms of habitat structure and amount of resources, researchers study the associations between the biodiversity of communities and these gradients in rainforests, where the very high species richness and densities within other continuous habitats makes it difficult to quantify animal communities. We analysed the diversity of aquatic insect communities in relation to different tank-bromeliad species in a primary rainforest (French Guiana) using artificial intelligence and complex optimization techniques to classify communities and model their determinants. First, the self-organizing map (neural network) was used to classify 158 bromeliads according to the quantitative structure of the insect communities. Catopsis berteroniana and Guzmania lingulata formed separate clusters of plants on the virtual map, while Vriesea splendens, Vriesea pleiosticha and Aechmea melinonii were grouped together in the remaining clusters. Some insect taxa occurred in all bromeliads, while other taxa were specific to a given species. Second, general linear modelling allowed us to specify the influence of the bromeliad species; water volume and volume of fine particulate organic matter inside of the tank; elevation above the ground; and sampling site on taxonomic richness and insect abundance. The number of taxa and individuals per plant increased with greater water volume, but the slope of the relationships depended on the bromeliad species. The significant influence of bromeliad species suggested that at similar water volumes different plant species had different taxon richness and insect abundance. Greater amounts of fine particulate organic matter were detrimental to community diversity in the tanks, probably because they decreased available space by clogging it and/or affected oxygen concentrations. The influence of tank-bromeliad species on the aquatic insect community was primarily related to their physical (and probably chemical) features rather than to species-specific associations sensu stricto. The classification of bromeliads with respect to animal species is likely to provide referential schemes for those biodiversity patterns to be expected under certain conditions, and may help to target model communities for subsequent experimental research. (C) 2008 Elsevier B,V. All rights reserved.

Abstract: For many kinds of ecological, evolutionary and developmental study, it is important to be able to describe the life-history of the individuals of a particular species/population. In the case of myriapods and other arthropods, this involves separating the different life-history stages (or stadia or instars) that are separated by moults. However, it has recently been pointed out that in the earliest post-embryonic stages the cuticle is still quite flexible; this means that visible external developmental changes can occur between moults as well as during them. Here, we provide evidence for such inter-moult changes in the coastal geophilomorph centipede Strigamia maritima. The character states studied enable finer-scale resolution of early post-embryonic forms than was hitherto possible. Specifically, we describe five transitional forms during a period in which just two (Peripatoid and Foetus) have traditionally been recognized

Abstract: Eperua grandiflora, which is widely distributed in the French Guiana forest region, shows high variability in decay resistance. Further information concerning this wood quality parameter is necessary, but standard testing methods are complex and time-consuming. We assessed the use of colorimetry to determine durability in heartwood samples from a range of trees. Eperua grandiflora colour parameters were measured using a CIELAB system, revealing that the tree effect was greater than the radial position and height effects. The wood samples were exposed to Coriolus versicolor and Antrodia sp. according to two European standards (En 350-1 and XP CEN TS 15083-1). Eperua grandiflora is more susceptible to brown rot. These two standards did not give the same durability classes. The high variation in natural durability was due to the tree effect. These two properties were found to be correlated and the assessment also distinguished the extreme durability classes but they are not sufficient to classify the class of durability of this species.

Abstract: Tree steins shrink in diameter during the day and swell during the night in response to changes in water tension in the xylem. Stein shrinkage can easily be measured in a nondestructive way, to derive continuous information about tree water status. The relationship between the strain and the change in water tension can be evaluated by empirical calibrations, or can be related to the structure of the plant. A mechanical analysis was performed to make this relationship explicit. The stem is modeled as a cylinder made of multiple layers of tissues, including heartwood, sapwood, and inner and outer bark. The effect of changes in water tension on the apparent strain at the surface of a tissue is quantified as a function of parameters defining stem anatomy and the mechanical properties of the tissues. Various possible applications in the context of tree physiology are suggested.